Graphing is the TI-84's most-used skill, and the one students get wrong most often — usually not because the maths is hard, but because the viewing window is wrong. This guide walks through graphing on a TI-84 step by step: entering a function in Y=, setting WINDOW, using ZOOM and TRACE, and finding intercepts, maxima, minima and intersections with the CALC menu. It works the same on the TI-84 Plus, the TI-84 Plus CE, and the online calculator on this site.

Step 1 — Enter the function in Y=

Press Y=. You will see a list: Y1=, Y2=, Y3=, up to Y0=. Type your equation next to Y1=. Use X,T,θ,n for the variable X — on the physical calculator it is the key just below the screen; on this site, type x or tap the X key.

Worked example. To graph y = 2x + 3, press Y=, type 2X+3 next to Y1=, and press ENTER. To graph a parabola, type X^2 — press the ^ key, then 2. To graph y = x² − 4x + 3, type X^2-4X+3. Fractions, brackets and negative numbers all work the same way: use the (−) key for a negative number, not the minus key, or the calculator will read it as subtraction.

You can enter up to ten functions at once. The calculator graphs them in different colours on the Plus CE, and in different line styles on the original Plus. If a function is giving you trouble, check the two most common mistakes first: a missing closing bracket, and a variable typed as a letter other than X.

Step 2 — Press GRAPH

Press GRAPH. The calculator draws the function on the coordinate plane. If you see nothing, do not assume the function is wrong — nine times out of ten, the graph is outside the current viewing window. That is Step 3.

On this site, enter the function in the Y1 box in the Graph panel and the graph draws automatically. Click the graph to trace a point.

Step 3 — Set the WINDOW

Press WINDOW. You will see Xmin, Xmax, Xscl, Ymin, Ymax, Yscl, and Xres. These six numbers decide what part of the plane you see:

SettingWhat it does
Xmin / XmaxThe left and right edges of the graph
Ymin / YmaxThe bottom and top edges of the graph
Xscl / YsclThe distance between tick marks on each axis
XresHow finely the graph is drawn (leave at 1)

The standard window is Xmin = −10, Xmax = 10, Ymin = −10, Ymax = 10, Xscl = 1, Yscl = 1. Most textbook problems fit in it. If your graph is a flat line at the bottom of the screen, your Y values are much larger than 10 — try Ymin = −100, Ymax = 100. If your graph is a steep line that leaves the screen immediately, your X range is too narrow — try Xmin = −20, Xmax = 20.

Worked example. Graph y = x² with Xmin = −10, Xmax = 10, Ymin = −10, Ymax = 10. The parabola's vertex sits at (0, 0) and the arms leave the top of the screen at about x = ±3, because 3² = 9 and 4² = 16 is already off the screen. To see more of it, set Ymax = 100 and Xmax = 10 — now the arms reach the top at x = ±10. The shape hasn't changed; only the window has.

Step 4 — Use ZOOM presets

ZOOM is a shortcut for WINDOW. Press ZOOM and you get a menu of presets:

For trig graphs, always use ZTrig — in the standard window, sin(x) looks squashed and its period is hard to read. For a quick check of any function, ZStandard then ZoomFit is a reliable pair.

Step 5 — TRACE a point

Press TRACE. A cursor appears on the graph, and the bottom of the screen shows its X and Y coordinates. Press ← and → to move along the curve. Press ↑ and ↓ to jump between functions when you have more than one graphed.

TRACE is how you answer "what is y when x = 4?" without doing the arithmetic: trace until X = 4 and read Y. For an exact answer, type the X value while tracing — press TRACE, type 4, press ENTER, and the cursor jumps to X = 4.

Step 6 — Find intercepts, maxima, minima and intersections (CALC)

Press 2ND → CALC (the TRACE key's second function). This is the most powerful menu on the calculator:

CALC optionWhat it findsWhen to use it
1: valuey for a given x"Find f(3)"
2: zeroWhere the graph crosses the x-axis"Solve x² − 4 = 0"
3: minimumThe lowest point of a valley"Find the minimum of a parabola"
4: maximumThe highest point of a peak"Find the maximum of a cubic"
5: intersectWhere two graphs cross"Solve 2x + 3 = x²"
6: dy/dxThe gradient at a point"Find the slope at x = 2"
7: ∫f(x)dxThe area under the curve"Find the definite integral"

Worked example — intersection. Solve 2x + 3 = x². Graph Y1 = 2X+3 and Y2 = X². Press 2ND → CALC → 5 (intersect). The calculator asks "First curve?" — press ENTER. "Second curve?" — press ENTER. "Guess?" — move the cursor near one crossing point and press ENTER. It returns the intersection, x ≈ 3, y ≈ 9. Repeat near the other crossing to get x = −1, y = 1. Check by hand: 2(3)+3 = 9 and 3² = 9. Correct.

Worked example — zero. Solve x² − 4x + 3 = 0. Graph Y1 = X²−4X+3. Press 2ND → CALC → 2 (zero). It asks for a left bound and a right bound — move the cursor to the left of a root and press ENTER, then to the right and press ENTER, then press ENTER for a guess. It returns x = 1. Repeat for the second root, x = 3. Factor check: (x−1)(x−3) = x² − 4x + 3. Correct.

Common graphing problems (and the fix)

ProblemFix
Blank screen after GRAPHPress ZOOM → 6 (ZStandard), or widen WINDOW
Graph looks like a jagged staircaseThe function changes too fast for the window — zoom in, or check for a missing bracket
"ERR: SYNTAX"Missing bracket, or a letter other than X used as the variable
"ERR: WINDOW RANGE"Xmin is greater than Xmax, or Ymin greater than Ymax — swap them
Only one function graphsCheck the = sign is highlighted in Y=; press ENTER on it to turn a function on
Trig graph looks wrongCheck MODE: Degree vs Radian. Use ZOOM → 7 (ZTrig)

Graphing on the online calculator

On this site, the Graph panel on the home page does the same job: type functions into Y1–Y3, click the graph to trace, and use Zoom In / Zoom Out and the WINDOW boxes. It is for practice and homework — during a real exam you will need the physical calculator, so practise the keystrokes above until they are automatic.

Frequently asked questions

How do I graph two equations at once on a TI-84?

Enter the first in Y1= and the second in Y2=, then press GRAPH. Both draw at the same time. Press TRACE, then ↑ or ↓ to jump between them.

Why is my TI-84 graph blank?

Almost always the window. Press ZOOM → 6 for the standard window. If it is still blank, check the function is turned on in Y= (the = sign should be highlighted) and that you used X as the variable.

How do I find where two graphs intersect?

Graph both functions, press 2ND → CALC → 5 (intersect), confirm the first and second curves, move the cursor near the crossing and press ENTER.

What window should I use for trig graphs?

ZOOM → 7 (ZTrig). It sets the X range so that π, 2π and their multiples fall on the tick marks, which makes sine and cosine easy to read.

Next: How to Do Statistics on a TI-84 · How to Use Matrices · Full manual