Statistics is where the TI-84 earns its place in AP Statistics and college courses: it does in seconds what takes a spreadsheet several minutes. This guide covers the full workflow — entering data into lists, running 1-Var Stats, drawing histograms and boxplots, and running linear regression (LinReg) — with the exact keystrokes and a worked example you can check by hand.
Step 1 — Enter data into lists (STAT → EDIT)
Press STAT, then 1 (Edit). You will see lists L1, L2, L3, up to L6. Type your data into L1, pressing ENTER after each number. To clear a list first, highlight the list name at the top (L1), press CLEAR, then ENTER — this empties the list without deleting it.
Worked example. Use this data set — the heights, in centimetres, of seven plants after two weeks: 2, 4, 4, 5, 7, 9, 10. Enter them into L1. If you make a mistake, move the cursor onto the wrong number, type the correction, and press ENTER. To insert a number, move to the position, press 2ND → INS; to delete one, press DEL.
For two-variable data (for example, hours studied vs test score), enter the X values in L1 and the Y values in L2, in the same order, one pair per row. The calculator pairs them by row, so a missing value in one list will shift everything — count both lists before you continue.
Step 2 — Run 1-Var Stats (STAT → CALC → 1)
Press STAT, then → to CALC, then 1 (1-Var Stats). On the TI-84 Plus CE, press ENTER and it will ask which list — leave it as L1 and press ENTER. The screen shows:
| Symbol | Meaning | Our example (2, 4, 4, 5, 7, 9, 10) |
|---|---|---|
| x̄ | Mean (average) | 5.857 |
| Σx | Sum of the data | 41 |
| Σx² | Sum of the squares | 287 |
| Sx | Sample standard deviation | 2.91 |
| σx | Population standard deviation | 2.70 |
| n | Number of data points | 7 |
| minX / Q1 / Med / Q3 / maxX | Five-number summary | 2 / 4 / 5 / 9 / 10 |
Which standard deviation? Use Sx (sample) when your data is a sample from a larger population — this is the usual case in class and in AP Statistics. Use σx (population) only when your data is the entire population. On this site, the Statistics panel shows both, labelled clearly.
Check by hand. Mean = 41 ÷ 7 = 5.857. Median: the sorted data is 2, 4, 4, 5, 7, 9, 10, and the middle value (4th of 7) is 5. The calculator agrees — which is how you know you entered the data correctly.
Step 3 — Draw a histogram or boxplot (STAT PLOT)
Press 2ND → STAT PLOT, then 1 (Plot1). Press ENTER to turn it On, choose the histogram icon (or the boxplot icon), set Xlist to L1 and Freq to 1. Then press ZOOM → 9 (ZoomStat) — this fits the window to your data automatically.
A histogram shows the shape of the distribution: is it roughly symmetric, skewed left, skewed right, or bimodal? A boxplot shows the five-number summary at a glance — the box runs from Q1 to Q3 with a line at the median, and the whiskers reach the minimum and maximum. Outliers, if any, appear as separate points beyond the whiskers.
To change the histogram's bar width, press WINDOW and change Xscl — a larger Xscl makes wider bars and fewer of them. For our example data, Xscl = 2 gives bars of width 2, which shows the shape clearly.
Step 4 — Linear regression: LinReg (STAT → CALC → 4)
Regression finds the straight line that best fits two-variable data. Enter the X values in L1 and the Y values in L2, then press STAT → CALC → 4 (LinReg(a+bx)). The calculator returns:
- a — the y-intercept of the line of best fit.
- b — the slope: how much Y changes for each one-unit increase in X.
- r — the correlation coefficient, from −1 to 1. Near ±1 means a strong linear relationship; near 0 means almost none.
- r² — the proportion of the variation in Y explained by X.
Worked example. Hours studied (L1): 1, 2, 3, 4, 5. Test score (L2): 2, 4, 5, 4, 5. LinReg gives roughly y = 2.2 + 0.6x, r ≈ 0.77. Interpretation: each extra hour of study is associated with about 0.6 extra marks, and the correlation of 0.77 is moderately strong. Note the language — associated with, not causes. Regression never proves causation.
If r doesn't appear: on the TI-84, r and r² only show if Stat Diagnostics are on. Press 2ND → 0 (CATALOG), scroll to DiagnosticOn, press ENTER twice. Or press MODE and check Stat Diagnostics is set to ON. On this site, the LinReg tool always shows r and r².
Step 5 — Predict with the regression line
Once you have the line, use it to predict. With y = 2.2 + 0.6x, a student who studies 6 hours is predicted to score 2.2 + 0.6 × 6 = 5.8. Two warnings: never predict far outside the range of your data (extrapolation is unreliable), and remember the prediction is an average — individual students will vary around it.
To store the regression equation on the calculator, run LinReg with the VARS menu: STAT → CALC → 4, then VARS → Y-VARS → 1 → 1 to store it as Y1, then GRAPH to see the line drawn through your scatter plot.
Other regressions worth knowing
| Regression | STAT → CALC | Use when |
|---|---|---|
| LinReg | 4 | Data looks like a straight line |
| QuadReg | 5 | Data curves like a parabola |
| CubicReg | 6 | Data has two bends |
| ExpReg | 0 | Data grows or decays exponentially |
| SinReg | C | Data is periodic (seasons, tides) |
The steps are identical for each: enter the data in L1/L2, choose the regression, read a, b, c and r². Compare r² values to decide which model fits best — but also look at the scatter plot. A high r² on the wrong model is still the wrong model.
Common statistics mistakes
- Forgetting to clear the list — old numbers left in L1 corrupt the new calculation. Clear first, every time.
- Using σx instead of Sx — in almost every class problem, Sx (sample) is the one wanted.
- Reading r as a percentage — r is not a percentage; r² is the proportion of variation explained.
- Confusing correlation and causation — a strong r says the variables move together, not that one causes the other.
- Leaving DiagnosticOn off — then r and r² never appear, and students think the calculator is broken.
Frequently asked questions
How do I find the mean and standard deviation on a TI-84?
Enter the data in L1 (STAT → EDIT), then STAT → CALC → 1 (1-Var Stats). The mean is x̄ and the sample standard deviation is Sx.
How do I do linear regression on a TI-84?
Put X values in L1 and Y values in L2, then STAT → CALC → 4 (LinReg). It gives y = a + bx, plus r and r². Turn on DiagnosticOn first if r doesn't show.
What is the difference between Sx and σx?
Sx is the sample standard deviation (divide by n−1); σx is the population standard deviation (divide by n). Use Sx for a sample, σx for a whole population.
How do I make a histogram on a TI-84?
Enter data in L1, press 2ND → STAT PLOT → 1, turn Plot1 On, choose the histogram icon, set Xlist to L1, then ZOOM → 9 (ZoomStat).
Next: How to Graph · How to Use Matrices · Try the Statistics panel